Sewing Machine Feet

IMG_20160626_110700The Zipper Foot

These are an essential foot in my humble opinion. It allows you to get the sewing machine needle up and close to the teeth of your zip. That gives you more control of the end result of your project.

The foot has two sides to it, a left and a right. You need a clip on adaptor to fit the foot in the photo. You then clip it on to either side, depending on which side of the teeth you are sewing.  If you’re not sure which side you need, clip the foot on to one side and then put your project underneath. If you’re not as close as you want to be, move the foot to the other side.

IMG_20160626_110051

What else can I use it for?

The zipper foot is also great for sewing in piping cord trim. It means you can get close to the cord itself, leaving less of the flange visible.

Variations on the Foot

The foot can also come as a screw on version, meaning you don’t need the clip on adaptor.

A further variation is the invisible zipper foot.

Tips for Use

Make sure your machine needle is in the right position before you sew. To check, fit the foot and then slowly lower the needle using the fly wheel on the right hand side of the machine (that’s the wheel on the end). If the needle hots the foot, adjust the position before you start sewing. On some machines you can move the needle with a button marked L, M & R (left, middle and right).

Check the machine is set for a straight stitch. This foot can’t be used with a zig zag stitch-the needle will hit the foot and break.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s